Rib-Type Stainless Steel Glass Hanger Clamp for Point-Supported Glass Curtain Wall

Rib-Type Stainless Steel Glass Hanger Clamp for Point-Supported Glass Curtain Wall

The rib-type glass hanger clamp suspends and fixes glass fins (ribs) in point-supported all-glass curtain walls. It clamps the top edge of the vertical glass fin and hangs the whole fin assembly from the supporting overhead steel structure, transferring wind loads from the glass back to the frame.

Precision cast and machined in stainless steel, the clamp grips the glass fin edge with EPDM / nylon pads so there is no direct metal-to-glass contact. The design accommodates glass fin thicknesses from 8 to 19 mm, with custom ranges arranged per project.

Key Features

• Material: SS304 / SS316 stainless steel, precision cast and machined
• Type: Rib-type glass fin hanger with top-edge clamping
• Glass fin thickness: 8 to 19 mm, custom per project
• Design: Top-edge clamping with EPDM / nylon pads protecting the glass
• Finish: Mirror polished or satin brushed
• Quality: 100% inspected before shipment; material test certificates available on request

Specifications

• Product type: Rib-type (fin) glass hanger clamp
• Clamping edge: Top-edge clamping of the glass fin
• Glass fin thickness: 8 to 19 mm range, custom per project
• Contact lining: EPDM / nylon pads against the glass
• Material options: SS304 / SS316 stainless steel
• Finish options: Mirror polished or satin brushed

Installation & Usage

The hanger body is first fixed to the overhead support structure, then the glass fin is offered into the top clamping slot with the EPDM / nylon pads in place. Fasteners are tightened evenly until the fin is held firmly, taking care not to overtighten against the glass edge. Vertical alignment of the fin should be checked before the final tightening.

Quality Assurance

Every rib-type hanger is 100% inspected before shipment for jaw width, pad seating and surface finish. Material test certificates are available on request to support project specifications.

Applications

• Point-supported all-glass curtain walls
• Glass fin / rib facade support
• Atriums, overhead glass and entrance lobby glazing
• Canopy and skylight fin suspensions

Customization & OEM

Custom glass fin thickness ranges, arm configurations and finishes are available. Wholesale and OEM orders are welcome. Share your fin schedule with our engineering team to request a quote.